IC-SD infrared led rev a3, page 1/ 3 features ? emission peak at 740 nm matched to silicon detectors and opto-ics ? optimized irradiance pattern ? high temperature range -40 to 125 c ? power output 0.6 mw at 20 ma ? high switching speed ? package suitable for smt mounting applications ? illumination for high resolution optical encoder ? modulated light barriers packages sd1c dimensional outline copyright ? 2006 ic-haus http://www.ichaus.com 0,7 3,83 3 , 9 1 5 , 3 6 4 , 7 1 4,59 2 , 2 0 2 , 2 0 6 0,8 0,8 8 bottom view side view top view anode (+) note 1) note 1) note 3) cathode (-) s o l d e r m a s k all dimensions in mm notes: 1) edges metallized 2) metallized areas indicated with or 3) lens cap to-18 (see schott sl 10.032.901 specification for details) european projection solder mask
IC-SD infrared led rev a3, page 2/ 3 absolute maximum ratings beyond these values damage may occur (ta = 25c, unless otherwise noted) item symbol parameter conditions fig. unit no. min. max. g001 if forward current (dc) 50 ma g002 ifm peak forward current tp 50s, tp/t=0,5 100 ma g003 ifsm surge forward current tp 10s 1000 ma g004 vr reverse voltage 5 v g005 p power dissipation case temperature 25c 150 mw thermal data item symbol parameter conditions fig. unit no. min. typ. max. t01 tamb operating temperature range -40 125 c t02 tstg storage temperature range -40 125 c t03 ts soldering temperature soldering, 10 sec 230 c t04 rthja thermal resistance junction to ambient tbd k/w electrical characteristics tamb = 25c, unless otherwise noted item symbol parameter conditions tj fig. unit no. c min. typ. max. electrical and optical characteristics 001 vf forward voltage if = 10 ma 1.6 1.8 v 002 vf forward voltage if = 20 ma 1.7 1.9 v 003 vr reverse voltage ir = 100 a 5 v 004 e radiant power if = 10 ma 0.2 0.3 mw 005 e radiant power if = 20 ma 0.4 0.6 mw 006 tk( e ) temperature coef?cient of radiant power if = 5 ma, tamb = 25c...125c -0.4 %/k 007 p peak wavelength if = 10 ma 730 740 750 nm 008 ? spectral half width if = 10 ma 26 nm 009 2 viewing angle if = 10 ma 8 deg. 010 tr, tf switching time if = 10 ma 50 ns this speci?cation is for a newly developed product. ic-haus therefore reserves the right to change or update, without notice, any information contained herein, design and speci?cation; and to discontinue or limit production or distribution of any product versions. please contact ic-haus to ascertain the current data. copying C even as an excerpt C is only permitted with ic-haus approval in writing and precise reference to source. ic-haus does not warrant the accuracy, completeness or timeliness of the speci?cation on this site and does not assume liability for any errors or omissions in the materials. the data speci?ed is intended solely for the purpose of product description. no representations or warranties, either express or implied, of merchantability, ?tness for a particular purpose or of any other nature are made hereunder with respect to information/speci?cation or the products to which information refers and no guarantee with respect to compliance to the intended use is given. in particular, this also applies to the stated possible applications or areas of applications of the product. ic-haus conveys no patent, copyright, mask work right or other trade mark right to this product. ic-haus assumes no liability for any patent and/or other trade mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
IC-SD infrared led rev a3, page 3/ 3 ordering information type package order designation IC-SD sd1c IC-SD blcc sd1c for information about prices, terms of delivery, other packaging options etc. please contact: ic-haus gmbh tel.: +49 (61 35) 92 92-0 am kuemmerling 18 fax: +49 (61 35) 92 92-192 d-55294 bodenheim web: http://www.ichaus.com germany e-mail: sales@ichaus.com
|
